Support Topic

Why is my Fence Transmitter making a loud noise?

This sound is the loop alarm, it indicates that there is an interruption in the Boundary Loop signal:

  • Make sure both ends of the Boundary Wire are securely plugged into the Boundary Wire Terminals and that 1.3 cm of the insulation is stripped so that the copper wire is exposed. Check to be sure that the copper of the ends of both of these wires are bright and shiny with no corrosion on the wire.
  • Perform the Short Loop Test to determine if the Fence Transmitter needs to be replaced or if the Boundary Wire is broken.
  • If the Fence Transmitter is functioning properly when you perform the Short Loop Test, then you likely have a break in your Boundary Wire. See the Locating a Break in the Wire section for assistance.
Products related to this Support Topic: