.jpg)
In-Ground Fence™ System
SKU: SDF-100C
MANUALS & DOWNLOADS
Troubleshooting
- What is a Surge Protection Kit?
- I have a break in the Boundary Wire.
- Can I twist one wire to make a gate or safe area that my dog can cross?
- Can I use the system with an existing fence?
- The collar has to be held on top of the Boundary Wire to activate, or it does not activate at the Boundary at all.
- The Collar Receiver is beeping, but the dog is not responding to the stimulation.
- How do I change the stimulation level?
- How do I drain the battery memory?
- How do I Fit the Collar Receiver for my dog?
- What is a System Test or Short Loop Test?
- How does the SDF-100A In-Ground FenceSystem work?
- Why do I have an inconsistent signal on my boundary?
- The Collar Receiver activates inside the house.
- The Collar Receiver is not beeping or stimulating.
- The Collar Receiver will not change stimulation levels.
- Why is my Fence Transmitter making a loud noise?
- My Transmitter is not lighting up any longer.
- How do I change the Boundary Width?
Setup
- Installation Step 1: Locate and Place the Fence Transmitter
- Installation Step 2: Lay Out the System
- Installation Step 3: Position the Boundary Wire
- Installation Step 4: Connect the Wires to the Fence Transmitter
- Installation Step 5: Prepare the Collar Receiver
- Installation Step 6: Set the Boundary Width and Test the Collar Receiver
- Installation Step 7: Install the Boundary Wire
- Installation Step 8: Place the Boundary Flags
- Installation Step 9: Fit the Collar Receiver
Training
- How old does my dog have to be before starting to train on the In-Ground Fence™ system?
- Training Day 1- Boundary Flag Awareness
- Training Days 15-30- Monitoring Your Dog
- Training Days 2-4- Continue Boundary Flag Awareness
- Training Days 5-8- Distraction Phase
- Training Days 9-14 - Unleashed Supervision
- Introduction to Training
