Setup Step 1: Prepare the Remote Transmitter
- Lift the rubber cover protecting the Charging Jack.
- Connect one of the charger connectors to the Charging Jack.
- Plug the charger into a standard 120-volt AC wall outlet.
- Charge the Remote Transmitter for 24 hours for the first charge. Recharges take only 12 hours. (Note: The Transmitter Indicator Light will flash after 12 hours of charging. For the first charge, continue to charge the Remote Transmitter for an additional 12 hours.)
- When charging is complete, replace the rubber cover.
Products related to this Support Topic:
Register Your Product
Get the most out of your warranty by registering your product.
Warranty & Return Info
Read about our warranty and return policies.
